Open Country Campware and Camping Cookware
Open Country Campware and Camping CookwareTwitterFacebook

Game Processing
Jerky  Spices Kits
Campware Kits
Fish Game Cleaning
Canteens Bottles
Open Country Campware, customer service and warranties 1-800-288-4545
Sausage Maker Assembly « Back

Make sure all parts have been cleansed and dried before assembly.

Assemble Grinder Head to Base. Secure Grinder Head by turning Locking Screw clockwise until tight. Be sure the Grinder Head is fully seated into Base before tightening Locking Screw. NOTE: Notch on Grinder Head aligns with Key in Base.

Insert Feed Screw into Grinder Head, long end of spindle first. Turn slightly until fully set in Grinder Head.

Place Sausage Maker Adapter and Sausage Cone onto end of Feed Screw.

Insert Ring Nut over Sausage Cone and thread onto end of Grinder Head, turn clockwise until tight. Use Wrench if needed.

Insert Food Hopper on top of Grinder Head.

  1. Casings (natural or synthetic) are available in some grocery stores, most butcher shops, meat packing plants and butcher supply houses. Local butchers or giant supermarkets that make their own sausage are the best resource.
  2. Meats must be coarsely ground and seasoned before making sausage links.
  3. Select Sausage Cone based on size of casing to be used.
  4. Before stuffing, insert two fingers into one end of casing to open, hold under faucet and let water run the entire length. This will wash away some of the packing salt. If you don’t clean well, your sausage will turn out saltier than when you tested the seasoning.

To Stuff Casings:
  • Gather all of casing over Sausage Cone, except the last 4 inches.
  • Place seasoned meat into Food Hopper and depress Switch “ON” (I).
  • Use Pushrod to push seasoned meat into Grinder Head. As you push mix through Grinder, it will stuff your casing.
  • As casing begins to fill, tie-off end with string.
NOTE: Stuff casing loosely, as some sausages will expand during cooking.
  1. Distribute meat through casing and twist into links as it fills to obtain desired size and shape.
  2. When finished, or casing is full, press Switch “OFF” (O).
  3. Unplug unit from electrical outlet and clean thoroughly by following cleaning instructions.
Customer Service About Us Contact Us Warranty Registration Newsletter Sign-Up Recipes How To Guides Return Policy
© 2019 The Metal Ware Corporation
Privacy Policy
Powered By: DMI Studios
Your online purchase is safe and secure